Third-order Nonlinear Optical Properties Research Articles

Luminescence and two-photon absorption assisted optical limiting properties of Ag-doped CdWO4 nanorods

The emerging demand for the fabrication of nonlinear optical materials with high limits of optical power is obvious in nonlinear optics due to their wide application in photonic devices. We report the linear and third-order nonlinear optical properties of Ag-doped CdWO4 nanorods and their dependence on Ag-doping concentration. CdWO4 nanorods with different Ag concentrations were synthesized by the chemical precipitation method and characterized by UV–Vis absorption, X-ray diffraction (XRD), Raman, Photoluminescence and its lifetime studies, X-ray Photoelectron spectroscopy and Transmission Electron Microscopy (TEM). The introduction of Ag ions has led to an increased redshift in the CdWO4 absorption spectra extended into longer wavelength bands, thus enhancing optical absorption within the visible range. The XRD pattern showed that the nanorods crystallized in a monoclinic wolframite structure. The incorporation of Ag in CdWO4 decreases the luminescence emission intensity due to surface quenching effect. Luminescence lifetime measurement reveals the longer decay lifetime for Ag-doped CdWO4 nanorods due to the reduction of density of defects and deep trap state. The nonlinear optical behaviour of the nanorods was investigated by an Open aperture Z-scan technique at 532 nm using pulsed wave Nd: YAG laser. Experimental results showed that reverse saturable absorption is responsible for the observed nonlinearity in the nanorods. The addition of Ag can significantly improve the nonlinear absorption coefficient and optical limiting effects of CdWO4 which can be used as a potential material in nonlinear optical devices.

Dual-Criteria Decision Analysis by Multiphotonic Effects in Nanostructured ZnO

Simultaneous interrogation of pump and probe beams interacting in ZnO nanostructures of a two-wave mixing is proposed for dual-path data processing of optical signals by nonlinear optical effects. An enhancement in third-order nonlinear optical properties was exhibited by Al-doped ZnO thin films. Multiphoton absorption and nonlinear refraction were explored by the z-scan technique at 532 nm with nanosecond pulses. The evolution of the optical Kerr effect in the ZnO thin films was analyzed as a function of the incorporation of Al in the sample by a vectorial two-wave mixing method. Electrical and photoconductive effects were evaluated to further characterize the influence of Al in the ZnO solid samples. Potential applications of nonlinear optical parameters for encoding and encrypting information in light can be envisioned.

Synthesis and growth of organic 2-ethylimidazolium hydrogen diglycolate single crystal for nonlinear optical applications

A single crystal of 2-Ethylimidazolium hydrogen diglycolate (DAEI) has been grown by slow evaporation solution (SEST) technique at 35 °C. The DAEI crystal belongs to a monoclinic crystal system with a P21/c space group. The Hirshfeld surface analysis determined the grown crystal has the highest intermolecular contribution for O..H interaction. The phase purity and various planes (hkl) of the DAEI crystal system were determined by powder X-ray diffraction analysis (PXRD). The functional groups and their different vibrations of DAEI crystal were identified by Fourier transform infrared analysis. The band gap energy value of the DAEI crystal is found to be 5.32 eV. Photoluminescence measurement reveals that the DAEI crystal has green emission. The material shows major weight losses of around 82.45 % in the temperature between 140 °C and 300 °C. The dielectric analyses were carried out for different frequencies (1Hz–1MHz) and different temperatures. The third-order nonlinear optical properties such as refractive index (n2), absorption coefficient (β) and susceptibility (χ(3)) were determined using the Z-scan technique using a He–Ne laser (λ = 632.8 nm).

Ingenious Modulation of Third-Order Nonlinear Optical Response of Zr-MOFs through Defect Engineering Based on a Mixed-Linker Strategy.

Defect engineering plays a pivotal role in regulating electronic structure and facilitating charge transfer, yielding captivating effects on third-order nonlinear optical (NLO) properties. In this work, we utilized a mixed-linker strategy to intentionally disrupt the initial periodic arrangement of UiO-66 and construct defects. Specifically, we incorporated tetrakis(4-carboxyphenyl)porphyrin (TCPP) with an exceptionally electron-rich delocalization system into the framework of UiO-66 using a one-pot solvothermal method, ingeniously occupying the partial distribution sites of the Zr6 clusters. Compared to UiO-66, the NLO absorption and refraction performance of TCPP/UiO-66 were significantly improved. Additionally, due to the presence of nitrogen-rich sites that can accommodate metal ions in the porphyrin ring of TCPP, Co(II), Ni(II), Cu(II), and Zn(II) are introduced into TCPP/UiO-66, extending the d-π conjugation effect to further regulate the defects. The NLO absorption behavior transforms saturation absorption (SA) to reverse saturation absorption (RSA), while the refraction behavior shifts from self-defocusing to self-focusing. This work shows that defects can effectively regulate the electronic structure, while TCPP plays a crucial role in significantly enhancing electron delocalization.

Linearization and characterization of the Wemple – DiDomenico model of ZnO/Ni/ZnO tri-layer thin films prepared by ALD and DC magnetron sputtering

Our present work is devoted to analyzing the influence of Ni on the optical properties of ZnO thin films deposited on glass and Si (100) substrates, with the use of ALD for ZnO deposition and DC magnetron sputtering for Ni interlayer deposition. The compositions as well as the crystalline structure of various multilayer thicknesses of Ni (10, 30, 50, and 70 nm), that sandwiched between ZnO Films (70 nm), before being optically characterized, were carried out by the X-ray diffraction (XRD). Based on the XRD results, the crystallite size was increased with the increase of the Ni interlayer concentration. Additionally, the material densities for both ZnO and Ni show the expected close-to-bulk values in all formations, where the large cavities between atoms, on the films make the dislocation density become smaller and the surface roughness values decrease as well, with the increase of Ni interlayer concentration. Different optical properties were observed for different Ni content. The optical absorption coefficient (α), refractive index (n), and extinction coefficient (k) have been deduced from the transmission T(λ) and absorption measurements A(λ). The optical energy gap Egoptare estimated from Tauc΄s extrapolation procedure and the Kubelka-Munk approach. The static refractive index (no), the oscillator energy (Eo), and the dispersion energy (Ed) are calculated using the Wemple-DiDomenico (WDD) theoretical model. Analysis of third-order nonlinear optical properties in crystalline ZnO/Ni/ZnO are being detailed. These promising results imply that the high-quality films produced by ALD, show how the insertion of Ni could enhance the quality of the optical properties of ZnO films.

Crystal structure, third-order nonlinear optical property relationship, density functional theory, and in silico bio activity of organic non-centrosymmetric crystal (E)-1-(thiophen-2-yl)-3-(p-tolyl)prop-2-en-1-one

Crystal structure, third-order nonlinear optical property relationship, density functional theory, and in silico bio activity of organic non-centrosymmetric crystal (E)-1-(thiophen-2-yl)-3-(p-tolyl)prop-2-en-1-one

Third-Order Nonlinear Optical Modulation Behavior of Photoresponsive Bimetallic MOFs.

Bimetallic metal-organic frameworks (MOFs) capable of sensing external stimuli will provide more possibilities for further regulating third-order nonlinear optical (NLO) properties. In this work, we synthesized bimetallic MOFs (ZnCu-MOF and ZnCd-MOF) through central metal exchange using a photoresponsive Zn-MOF as a precursor. Compared with Zn-MOF, both ZnCu-MOF and ZnCd-MOF exhibit significantly enhanced third-order NLO absorption properties. This is mainly attributed to the introduction of metal ions with different electron configurations that can adjust the bandgap of MOFs and enhance electron delocalization, thus promoting electron transfer. Interestingly, the bimetallic MOFs show a transition from reverse saturation absorption (RSA) to saturation absorption (SA) after exposure to ultraviolet irradiation, as they retain the properties of directional photogenerated electron transfer. Photoresponsive bimetallic MOFs not only have the effect of bimetallic modulation of electronic structures but also have the characteristics of photoinduced electron transfer, exhibiting diversified optical properties. These findings provide a novel method for the development of multifunctional NLO materials.

Ultrafast Dynamics, Optical Nonlinearities, and Chemical Sensing Application of Free-Standing Porous Silicon-Based Optical Microcavities.

The present work demonstrates the ultrafast carrier dynamics and third-order nonlinear optical properties of electrochemically fabricated free-standing porous silicon (FS-PSi)-based optical microcavities via femtosecond transient absorption spectroscopy (TAS) and single-beam Z-scan techniques, respectively. The TAS (pump: 400 nm, probe: 430-780 nm, ∼70 fs, 1 kHz) decay dynamics are dominated by the photoinduced absorption (PIA, lifetime range: 4.7-156 ps) as well as photoinduced bleaching (PIB, 4.3-324 ps) for the cavity mode (λc) and the band edges. A fascinating switching behavior from the PIB (-ve) to the PIA (+ve) has been observed in the cavity mode, which shows the potential in ultrafast switching applications. The third-order optical nonlinearities revealed an enhanced two-photon absorption coefficient (β) in the order of 10-10 mW-1 along with the nonlinear refractive index (n2) in the range of 10-17 m2 W-1. Furthermore, a real-time sensing application of such FS-PSi microcavities has been demonstrated for detecting organic solvents by simultaneously monitoring the kinetics in reflection and transmission mode.

Microscopic nonlinear optical activities and ultrafast carrier dynamics in layered AgInP2S6

Since the emergence of graphene, transition metal dichalcogenides, and black phosphorus, two-dimensional materials have attracted significant attention and have driven the development of fundamental physics and optoelectronic devices. Metal phosphorus trichalcogenides (MPX3), due to their large bandgap of 1.3–3.5 eV, enable the extension of optoelectronic applications to visible and ultraviolet (UV) wavelengths. Micro-Z/I-scan (μ-Z/I-scan) and micro-pump-probe (μ-pump-probe) setups were used to systematically investigate the third-order nonlinear optical properties and ultrafast carrier dynamics of the representative material AgInP2S6. UV-visible absorption spectra and density functional theory (DFT) calculations revealed a quantum confinement effect, in which the bandgap decreased with increasing thickness. The two-photon absorption (TPA) effect is exhibited under the excitation of both 520 and 1040 nm femtosecond pulses, where the TPA coefficient decreases as the AgInP2S6 thickness increases. In contrast, the TPA saturation intensity exhibits the opposite behavior that the TPA saturation is more likely to occur under visible excitation. After the valence band electrons undergo photon transitions to the conduction band, the non-equilibrium carriers relax through non-radiative and defect-assisted recombination. These findings provide a comprehensive understanding of the optical response process of AgInP2S6 and are a valuable reference for the development of optoelectronic devices.

Crystal growth, Hirshfeld analysis, optical, thermal, mechanical, and third-order non-linear optical properties of Cyclohexylammonium picrate (CHAP) single crystal

The organic single crystals of Cyclohexylammonium picrate (CHAP) had been grown using the method of slow evaporation solution growth. A determination was made regarding the solubility of the substance. The crystal's lattice cell parameters and morphology were characterized using single-crystal X-ray diffraction and powder X-ray diffraction techniques. The HRXRD techniques were utilized to assess the crystal quality. The functional groups of CHAP material were identified through the use of FT-IR and FT-Raman analysis. A Hirshfeld surface analysis was performed to investigate the formation of hydrogen bonds between N–H⋯O and C–H⋯O molecules. The grown crystals were examined in optical and thermal investigations utilizing UV–visible and TGA, DSC techniques. Mechanical analysis is used to quantify surface properties, such as work hardening coefficient and void volume. Z-scan analysis was utilized to calculate the non-linear refractive index (n2), nonlinear absorption (β), and third-order non-linear susceptibility (χ3).

Charge transfer induced linear and nonlinear optical properties in polypyrrole/ZnO@MoS2 ternary composites

Polymer-based ternary nanocomposites with tunable optical properties are the key components for optoelectronics applications. Here, we demonstrate the linear and nonlinear optical properties of polypyrrole (PPy) and its ternary composites with different concentrations of the MoS2–ZnO core–shell (ZnO@MoS2) heterostructure. The interesting observation of multiple excitons and their transportation through the interface of PPy and ZnO@MoS2 by using photoluminescence and fluorescence lifetime spectroscopy was studied. Furthermore, the third-order nonlinear optical properties of all samples were also measured by employing the z-scan technique at an excitation wavelength of 532 nm. The reverse saturable absorption of pure PPy was switched to saturable absorption after the addition of ZnO@MoS2 at the uniform linear transmittance. These ternary composites with good nonlinear responses provide an option for the development of high-performance nonlinear optical devices and open a new path for the future development of ternary systems in the optical fields.

The effect of π-extended indoleninyl-dibenzotetraaza[14]annulenes on their third-order nonlinear optical properties

Two new dibenzotetraaza[14]annulenes (DBTAAs) featuring indolenine moieties were synthesised via an acetic acid-catalysed condensation of 1,2-diaminobenzene with two diformyl indolenines in good yields. The structural identity of the compounds was confirmed by NMR (1H, 13C), FT-IR and elemental analysis. UV–visible analysis displays intense absorptions in the Soret band region with ɛ ranging from 0.32 to 1.02 × 105 M−1 cm−1 in various solvents of different polarities. The absorption spectra display a slight bathochromic shift upon replacing the indolenine (4a) with benz[e]indolenine (4b) groups on the DBTAA framework. Furthermore, the spectra exhibit solvatochromism shifts due to hydrogen-bonding interactions between the solutes and solvents. The effect of the extended π-conjugation on the electronic distributions at different energy levels was computed by Density Functional Theory (DFT) calculations. Compound 4b exhibits greater Nonlinear Optical (NLO) parameters compared to 4a due to the extended π-conjugation in the molecule. Hence, 4b could be utilised as a promising material for various NLO applications.

Investigating the third-order nonlinear optical properties of a Schiff base (DBAP) and its Co/Cu metal complex using Z-scan and DFT methodology

Utilizing UV-visible, Fluorescence spectroscopic, and Z-scan methods, the optical and structural properties of 2-(4-(dimethyl amino)benzylidene amino) phenol (DBAP) and their Co/Cu metal complexes were studied. The Z-scan method has been used to investigate the nonlinear absorption coefficient (β), nonlinear refractive index (n2), third-order susceptibility (χ(3)), and optical limiting (OL). In dimethyl sulfoxide (DMSO) and methanol (MeOH) solvents, the DBAP and their Co/Cu metal complexes display positive nonlinear absorption and a positive nonlinear refractive index, according to the Z-scan data. Using the Z-scan approach and an 800 nm central wavelength, femtosecond amplified 48 fs pulse, 1kHz repetition rate laser, the compound's third-order nonlinear optical (NLO) properties are measured. According to the Z-scan data, we may modify the structure and bonding of legend with metals to improve the NLO capabilities of metal complexes, making this material a promising choice for upcoming optoelectronic and photonic devices. The geometrical structure of the compound is optimized using theoretical computations at the B3LYP that are functional with 6-31G and the LanL2DZ on a mixed basis, as determined by the density functional theory (DFT) framework. They provide insight into the charge transfer interactions taking place in the molecule through their HOMO-LUMO analysis.

High nonlinear optical efficiency in zinc(II) and copper(I) stilbene based iminopyridine complexes: Absorption, emission analysis and advanced characterization

The novelty of this work lies in the comprehensive studies of the spectroscopic and third-order nonlinear optical properties of zinc(II) and copper(I) stilbene based iminopyridine complexes. Our previous work involved the synthesis as well as the characterization of both the free ligand and these its corresponding metal complexes and conducting quantum chemical calculations on their molecular orbitals, shedding light on their charge transfer and π-π* interactions. This makes these materials promising models for supramolecular assemblies. Thin films, obtained using the spin coating method, are characterized using Atomic Force Microscopy and Ellipsometry methods. These techniques provide valuable information about the physical properties of the layers, such as homogeneity, roughness and linear refractive index. Moreover, we present spectroscopic analysis that involve the absorption and emission of light, along with the decay time of photoluminescence in the thin films. Through advanced techniques like the Maker fringe method for third harmonic generation and the Z-scan method for recording nonlinear absorption and refraction, we demonstrate the high nonlinear optical efficiency of these complexes. This study presents how specific structural elements impacts tailoring in the enhancement of the NLO properties of these complexes. These findings underscore the potential of zinc(II) and copper(I) stilbene based iminopyridine complexes in nonlinear optics and photonics applications.

Crystal structure and third-order nonlinear optical properties of supramolecular cocrystals of 18-crown-6 with 5-aminoisophthalic acid

Crystal structure and third-order nonlinear optical properties of supramolecular cocrystals of 18-crown-6 with 5-aminoisophthalic acid

Integrated Anionic Zirconium-Organic Cage and Cationic Boron-Imidazolate Cage for Synergetic Optical Limiting.

Making oppositely charged metal-organic cages (MOCs) into a tightly ordered structure may bring interesting functions. Herein, we report a novel structure composed of anionic (Zr4 L6 )8- (L=embonate) tetrahedral cages and in situ-formed cationic [Zn4 (Bim)4 ]4+ (Bim=[BH(im)3 ]- ; im=imidazole) cubic cages. Chiral transfer is observed from enantiopure (Zr4 L6 )8- cage to enantiopure [Zn4 (Bim)4 ]4+ cage. A pair of enantiomers (PTC-373(Δ) and PTC-373(Λ)) are formed. PTC-373 exhibits high chemical and thermal stabilities, affording an interesting single-crystal-to-single-crystal transformation. More importantly, the combination of ionic pair cages significantly enhances its third-order nonlinear optical property, and its thin-film exhibits an excellent optical limiting effect.

Synthesis, Physicochemical and Third Order Nonlinear Optical Properties of Bis-Chalcone (BBDP) as Donor-pi Acceptor Chromophore in Organize Medium.

Bis-Chalcone (BBDP) has been prepared by condensation of N, N-dimethyl benzaldehyde and 1,1'-([1,1'-biphenyl]-4,4'-diyl) di (ethan-1-one), and structure of BBDP was characterized by Mass Spectra, 13C-NMR, 1H-NMR, and IR. Physicochemical properties including Dipole-moments, Stoke-Shifts, Oscillator-strength, dielectric constant and quantum-yields of fluorescence of BBDP were investigated by the emission and absorbances in different solvents. Compound (BBDP) displayed bathochromic shift upon increasing the solvent polarity (from n-Hexane to DMSO). Furthermore, we have exploited third-order nonlinear optical characteristics of the bisChalone were invigilated by the Z-scan techniques in Chloroform. The measurements were taken with a continuous-wave (CW) diode laser having a wavelength of 520 nm in CHCl3 solvent. The third-order nonlinear optical properties, such as the nonlinear refractive index (NLRI) n2, nonlinear absorption coefficient (NLAC) β, and nonlinear susceptibility χ(3), were measured at various solution concentrations and laser powers. The obtained values of n2, β, and χ(3) were estimated to be high, of the order of 10-7(cm2/W), 10-3 (cm/W), and 10-6 (esu), respectively. As a result, bis-chalcone (BBDP) is considered as a promising candidate for applications in nonlinear optical (NLO) devices and optical limiting (OL).

Synthesis, Growth, Photoluminescence, Thermal, and Third-Order Nonlinear Optical Properties of Glycine Methyl Ester Hydrochloride Single Crystal for Opto-Electronic Applications

Synthesis, Growth, Photoluminescence, Thermal, and Third-Order Nonlinear Optical Properties of Glycine Methyl Ester Hydrochloride Single Crystal for Opto-Electronic Applications

Enhanced optical third-harmonic generation in phase-engineered nanostructured Zn1−x Cd x S thin films for optoelectronic device applications

A polycrystalline nanostructured thin film of zinc cadmium sulfide was meticulously fabricated on a glass substrate using the thermal evaporation method physical vapor deposition within a vacuum chamber. Different doping concentrations were introduced by varying the cadmium (Cd) content, resulting in Zn1-x Cd x S films with Cd concentrations ranging from x = 0.00–0.20 wt %. The impact of Cd doping on the third-order nonlinear optical (TONLO) properties of these films was thoroughly studied using the Z-scan method, employing a diode-pumped solid-state continuous-wave laser. To gain insight into the structural characteristics, the Zn1-x Cd x S thin films underwent analysis through x-ray diffraction. Optical studies confirmed the tunability of the optical band gap (Eg) in the Zn1-x Cd x S films, ranging from 3.88 eV for undoped ZnS to 2.80 eV for the film fabricated with 20 wt. % of Cd-content. This significant reduction in ‘Eg’ renders the films highly suitable for use as absorbing layers in applications such as solar cells and optoelectronics. Surface morphology analysis, performed via field emission scanning electron microscopy, revealed noticeable alterations with increased Cd doping. Significantly, the doped films exhibited a substantial redshift in the band edge and an increase in transmittance within the visible and near-infrared regions. The investigation of TONLO properties, including the nonlinear absorption coefficient (β), nonlinear refractive index (n 2) and susceptibility χ(3), yielded values ranging from 3.15 × 10−3 to 8.16 × 10−3 (cm W−1), 1.65 × 10−8 to 7.45 x 10–8 (cm2 W−1), and 3.12 × 10−5 to 7.86 × 10−5 (esu), respectively. These results indicate the presence of self-defocusing nonlinearity in the films. Overall, the outcomes underscore the potential of Cd-doped ZnS nanostructures in modifying surface morphology and enhancing NLO characteristics. Zn1-x Cd x S thin films exhibit promise for applications in nonlinear optical devices, as evidenced by these encouraging findings.

Properties of nonlinear optical absorption and refraction of rapidly grown KDP crystals

Potassium dihydrogen phosphate (KDP) single crystals grown under different conditions were obtained by the “point seed” technique. Third-order nonlinear optical properties of type-II samples which were prepared from the pyramidal and prismatic sections of crystal, respectively, were systematically investigated using the Z-scan technique at λ = 532 nm. Some heat-treated samples have been studied simultaneously. The results show that the nonlinear optical absorption and nonlinear optical refraction have been reflected, meanwhile, the nonlinear refractive index (n2) is positive, suggesting the generation of self-focusing effect. Furthermore, the results indicate that the nonlinear absorption and nonlinear refraction were associated with the growth conditions of the crystal. The prismatic sample grown under the relatively low growth temperature range (45∼25 °C) and small supersaturation (4 %) possessed a smaller nonlinear absorption coefficient (β) and n2 (β=4.73 × 10−13 m/W, n2=2.82 × 10−13 esu) than that of the others. In addition, the values of nonlinear absorption and nonlinear refraction of the samples can be further reduced after thermal annealing. These results may provide an assist to understand the mechanism of laser-induced damage of KDP crystals.